Autowatch Ghost Immobiliser Installation
The Ghost is the UK’s most advanced aftermarket immobiliser for CAN buses. It is discrete, does not use LED indicators or key fobs and is concealed in the wiring of your vehicle.
It also allows users to temporarily disable the system through Transport Mode in the event of renting out their vehicle. This guide will walk you through the installation process of a Ghost immobiliser.
Professional Installation
The Autowatch Ghost immobiliser is a advanced security device that safeguards your vehicle from hacking, key cloning, and relay attacks. The system is directly connected to your vehicle's ECU and is secured by a unique PIN code that you choose. It's inaccessible to thieves using diagnostic scanners or other advanced methods, and is not able to be disabled by cutting circuits.
The system is easy to use, however professional installation is recommended to ensure a clean connection to the ECU of your vehicle. Installers certified by Thatcham can assist you with the installation and programing of your Ghost system. They can also suggest a tracking system or alarm to complement the protection package for your vehicle.
First, the installer needs to disconnect your battery in order to avoid accidental airbag deployment or short circuits. After this is completed the installer is now able to begin work. Hand tools are the most basic to be used to make precise connections. A multimeter is a great tool to verify electrical values. Insulation tape and cable tie are vital to secure connections and keep wiring neat. In addition, the user's manual provides specific guidance tailored to your Ghost Immobiliser model.
During the installation, it is important to choose an area for grounding that is free of paint and debris. The installer must be sure that the immobiliser's H and CAN L wires are connected to the appropriate ports on the vehicle's ECU. Depending on the model, these wires may require soldering or plugged into. Using a quality connector is recommended to ensure a sturdy and reliable connection.
Transport Mode can be turned on by the client after the installation is complete. This allows the vehicle to be used by valet parking attendants or mechanics without needing to know the pin code. To accomplish this, the user must press the service button on the dashboard five times in the space of two seconds. Once this is done, the system will confirm with 5 signal indicators.
The Autowatch Ghost 2 is a highly effective immobiliser that's TASSA certified and Thatcham approved. It's an excellent choice for those who rent their vehicles frequently on platforms like Turo. An immobiliser can reduce insurance premiums, since it reduces the likelihood of theft.
Getting Started
It's not difficult to come up with an autowatch immobiliser if you want to protect your car from theft. The device prevents your vehicle from starting the case that someone steals or copies your key. It's possible due to its advanced technology that stops the engine from starting until the correct PIN code is entered.
The device connects to the vehicle's bus network, CAN, allowing direct communication with the ECU. It uses existing buttons on the dashboard and the steering wheel to create a unique sequence only you can identify, making it impossible for someone else to start your car. This is the most secure way to safeguard your pride and joy. It will ensure that your car's value remains intact should you ever decide to sell it.
Installing a ghost immobiliser is an easy process, however, it is important to follow the directions carefully to avoid issues with electricity and system malfunctions. First, you need to find and locate a permanent 12V power source and an appropriate grounding point on the vehicle's chassis. Then, you can begin to connect the wires that will be used to activate the immobiliser. Be sure to use high-quality connectors and soldering techniques to ensure a strong connection. Insulate the connections using heat shrink tubing or insulation tape, or other materials to avoid short circuits of electricity.
Once the wires are connected, you are able to reconnect the battery and then turn on the engine to test the immobiliser's functionality. Once everything is working properly you can place it in a safe location under the dash or elsewhere in the vehicle. Be sure to cover it properly to stop thieves from getting into it.
The Ghost 2 immobiliser has been TASSA (Tracker and Aftermarket Security System Association) which means it is a top-quality deterrent for car thieves. It is a superior defense against key cloning, hacking and relay attacks, and it can't be disabled without knowing the code. The device is simple to use, and it can be set up to an option for a service valet so that your vehicle won't be activated if you bring it for an MOT or servicing.
Wiring
The Ghost Immobiliser, a cutting edge security system, is designed to stop theft of vehicles. It communicates with your vehicle's ECU and connects directly to the CAN bus. Unlike other aftermarket systems that require the removal of circuit components The Ghost Immobiliser does not interfere with the factory settings of your vehicle.
It's also undetectable to thieves using diagnostic scanners. The system doesn't transmit or receive radio frequency signals and instead uses CAN data for communication with your ECU. It also doesn't require modifications to your current key fobs.
Enter your disarm sequence (either two or one buttons) and then turn on the ignition of your vehicle to activate Ghost Immobiliser. The indicator will flash twice to confirm that you've entered the correct code. You can now start your vehicle and drive safely.
Once installed, the Ghost Immobiliser will secure your vehicle from key cloning and hacking while preserving the value of your pride and joy. In Transport Mode you can temporarily disable the Ghost Immobiliser when you need to hand your vehicle to service or valet park.
To complete a Ghost Immobiliser installation, you'll need find the source of power that is constant (12V) and an earthing point. Make sure that both are well-insulated and safe to touch. Cable ties are also suggested to secure the wires. This reduces the possibility of theft by thieves. To avoid committing mistakes, make sure to double-check these points and mark them using labels or tape. It's also a good idea to inspect all connections for signs wear and tear. Be sure to ensure that all connections are in place, and are properly sealed. Make Continue Reading to test your Ghost Immobiliser after installation has been completed. This will ensure that the unit is operating properly and that all connections and insulation are safe. Make sure to address any issues as soon as they arise.
Testing
The Autowatch Ghost immobiliser is an innovative vehicle security system that works seamlessly with your vehicle's ECU in order to prevent unauthorised motor starting. Its cutting-edge technology protects your vehicle from key cloning and hacking as well as other common methods employed by thieves to steal cars. The Ghost works in conjunction with existing tracking and alarm systems to provide the best security for your vehicle. The Ghost's unique features, paired with its subtle design, make it a popular choice for drivers who love cars and security-conscious drivers.
It is important to follow the steps of installation to ensure the complete integration of the Ghost Immobiliser. Refer to the wiring diagram for the vehicle as it will help you locate and connect the wires. Then, you'll need to identify the power source as well as grounding points. Once you've located them, you'll have to mark them so that they are easy to identify during installation. ghost immobiliser tracker to use high-quality materials and tools. Basic hand tools can assist you in making precise connections. A multimeter can verify electrical values, and also ensure safety. Cable ties and insulation tape will keep the connections neat and tidy. Finally, a user manual will provide specific instructions specifically tailored to your Ghost model.
Before proceeding with the installation it is important to test the system by entering the PIN code and starting the vehicle. This step will confirm the immobiliser is working as it should and will stop vehicle starts that are not authorized. It is recommended to complete this routinely as part of your routine inspections of your vehicle to ensure that the system is working properly.
After the installation is completed, you can start driving your car with confidence. The Ghost will protect your car from would-be car thieves. It will ensure that no one is able to escape with your car if they do not have the correct PIN code. The Ghost can also be used with a tracker approved by Thatcham to detect any attempts to tamper with or steal your vehicle, allowing you to locate your vehicle if it is stolen.
The Ghost can be used on a wide range of vehicles and is compatible with all major brands. If you are interested in securing your car with this cutting-edge device, call Monty's Locksmith today to find out more about our installation and service options. We are a TASSA Installer who is registered This certification ensures that we adhere to strict guidelines and procedures for installing our products. This assures customers, insurance companies, and law enforcement that all installations are performed in a safe and correct manner.