The Ghost Immobiliser
Immobilisers are an effective tool to fight vehicle theft. They stop the car from starting if it doesn't have an identification card. They also help to stop hotwiring and other traditional methods of vehicle theft. Modern methods such as key cloning or relay theft are becoming more common.
The Ghost Immobiliser has been designed to counter these trends and make your vehicle unnoticeable. It doesn't use LED indications or radio signals or key fobs, and is silent and discreet.
Easy to install
The Ghost Immobiliser is a revolutionary device, connects with the CAN data network of your vehicle to stop key cloning and theft. It is a TASSA-approved product and insurance companies also endorse it. It is almost unnoticeable by thieves and operates in silence. It uses buttons on your steering wheel as well as the centre console to create unique pin-code codes that you must enter before you can start your car. You can create as many as 20 different sequences in order to increase security. The system is simple to install and doesn't require any additional hardware or wiring.
It is recommended that you use an authorised installer of CAN immobilisers that is skilled in the specific type of vehicle you have to get the best results. It is ideal if they have a workshop located in your local area to enable you to go and get your installation completed. You will also find an array of tools and equipment that can help you with the installation. They will provide basic hand tools, multimeters insulation tape and heat shrink tubing to safeguard connections. A user's manual will give you instructions for your vehicle's wiring.
Before starting the installation Before beginning the installation, disconnect the battery to prevent short circuits and airbag deployment. Double-checking the CAN L and CAN H wires is essential, as incorrect identification can result in a faulty integration of the system. It is also a good idea to label or mark the wires. Finally, utilize a multimeter for verification that the identified power source is able to provide a consistent 12V power supply.
Advanced thieves can employ a variety of tactics to get around the Ghost Immobiliser, including blocking and using spoofing signals. These methods work by amplifying signals sent from the key fob to the electronic controller unit. With the help of advanced anti-jamming technology and a vigilant surveillance, you can protect your vehicle from these sophisticated attacks.
Security Increased
Ghost immobilisers are an additional layer of protection for your vehicle from theft. It is an PIN code protection system that is activated by pressing buttons on your dashboard or steering wheel, making it difficult for thieves to gain access to the device and take your vehicle. The device is designed to be hidden within your vehicle. It doesn't have any LEDs, or other signals to alert a potential burglar to its presence. It connects directly to the ECU of your car through the data bus. Continue Reading means that it isn't vulnerable to hacking or relay attacks.
The system is an excellent investment for those who own prestige vehicles, as they are at a higher chance of theft because of their value and their popularity. Its security features are enhanced to protect against key duplicates, ECU swapping, and other threats to your car's security. Some ghost immobilisers are also connected to apps, which means you can arm and dearm easily. They can also have an option for service/valet that allows you to temporarily disable them while your vehicle is being serviced or repaired.
Ghost immobilisers also have a excellent feature that is that it doesn't need any cutting of wire. This is a nice feature, especially if you are driving a car that does not have any built-in immobiliser technology. Some systems may also be equipped to work with the GPS tracking device, thereby providing an additional level of security for your vehicle. A GPS tracker may also reduce your insurance rates. If you opt to purchase ghost immobilisers, make sure that it is TASSA verified and that a professional installer installs it for you.
Compatibility with all major makes and models
The Ghost Immobiliser has been designed to be compatible with all major brands and models of vehicles, safeguarding your pride and joy against theft. It creates a unique pin code using buttons on your steering wheel, console, or door panels. You must enter this code before you can drive. The system is tamper-proof and undetectable. It's also backed by three-year warranty. It is also fully endorsed by insurance companies. This means you can lower your insurance premiums.
The Ghost system is different from traditional immobilisers that rely on the key fob to provide ignition control. It connects directly to the engine controller via the CAN bus. It is virtually impossible to remove, disable or hack. The Ghost system can also be paired with an iPhone app for remote monitoring and management.
You can create an PIN code that is easy for you to remember but mathematically difficult for thieves to determine. You can alter and customize the PIN at anytime to ensure your vehicle's security, even if it is situated in a parking area or on the street. You can also choose the valet or service mode if you need someone else to drive your vehicle temporarily, such as when it is in the garage. This feature is also a great way to prevent your car from being stolen by a shady mechanic. You can select a Ghost Call alert to give you extra peace of mind. It will inform you when your car is moving or has been moved.
Convenience
The ghost immobiliser is a highly effective security device that protects your vehicle from common theft methods such as key cloning and relay attacks. It connects to the vehicle's CAN data network and preventing communication with the engine ECU. This makes it impossible for thieves to duplicate or hack your car, making the installation of this system a good idea for any driver.
Installed, you'll need to enter a PIN up to 20 digits in length using the buttons on the dashboard and the steering wheel to start the car. The system is completely hidden and inaccessible to thieves because it does not emit any radio frequency signals. It can also be set to an individual-changeable PIN code which further enhances its security. The system is designed to avoid cutting of circuits, making it virtually impossible to tamper.
Some systems allow you to communicate directly with the immobiliser using an app on your phone to disarm it immediately in the event that you forget your PIN. Some systems even have a service/valet setting that allows you temporarily to start your car for instance, if you drop it off at valet or garage.
The Ghost Immobiliser is also unnoticeable to thieves since it does not transmit any radio signals, a major advantage over other aftermarket car security systems. It is also simple to use and doesn't require complex wiring. You can also use it together with a dash cam to provide added safety. Dash cam Thinkware F70 features clear and sharp 1080p HD footage, Format Free Technology, and parking mode. The system can also be wired for maximum performance and durability.
Installation
If you're looking to secure your vehicle from thieves it is important to select the right immobiliser ghost. This device can help in preventing theft of your car by blocking the communication between your engine controller unit (ECU) and key fobs. This prevents thieves from intercepting the signal and then cloning your key fob in order to start your car. It also can detect if it has been tampered and notify the owner of the vehicle.
The device is simple to install and connects to your vehicle's existing systems. It requires no modification to the wiring in your vehicle and can be tucked away in a hidden location, such as under the dashboard. Follow the instructions in the manual to ensure that the device is installed correctly. After installation, it is essential to test the system. This will ensure that the immobiliser ghost works as intended.
You can purchase an Autowatch Ghost 2 Immobiliser from an authorized installer and have it installed on your vehicle. The installer will connect Ghost to your vehicle's CAN Bus system, making it more difficult for thieves to remove the system or bypass it. The installation process generally takes between 2 and 3 hours.
It is recommended to consult the wiring diagram of your vehicle during the installation process. This will allow you to locate the CAN High and the CAN Low wires needed to connect your Ghost to the engine of your vehicle. It is also crucial to double-check the connections to make sure that they are secure and insulated.
Once the installation is complete, you can use the Ghost Immobiliser during normal operation. It will shut off your vehicle's ignition if it is not started with the correct PIN code, which you can set yourself. The ghost immobiliser cost can also be set to Service/Valet mode in the event that you have to hand over your vehicle for maintenance or valet parking.